Skip to main content
Current Projects

Science Building

Beam of Memory

BYU-Hawaii students, faculty, and staff signed their name on a beam in front of the Academic Advisory Center. On March 31, 2021 the beam was put in place on top of the Science Building.

August 6, 2021 Update

July 13, 2021 Update

June 25, 2021 Update

June 18, 2021 Update

June 11, 2021 Update

June 4, 2021 Update

April 30, 2021 Update

April 19, 2021 Update

April 2, 2021 Update

March 23, 2021 Update

March 5, 2021 Update

January 22, 2021 Update

January 15, 2021 Update

Overall view of the Science Building which is in the center of the photo. The structural steel is three-stories high and level 2 has metal decking. The Shear Wall is on the right and Concrete Stairwell is on the far left side of the structure. The concrete elevator shaft is between the two. Academic Oval can be seen at the back.

January 8, 2021 Update

January 3, 2021 Update

December 28, 2020 Update

December 15, 2020 Update

December 7, 2020 Update

November 19, 2020 Update

The Science Building is progressing fast. They have finished the concrete pour for the shear wall, elevator shaft, stair 2 wall for level 1 of the building, and now they are planning to pour the slab. Attached is a picture of the current state of the building.

Aerial view of the Science Building construction area. The foundation is covered with Stego wraps. Mikinele Way is on the left-hand side and Academic Oval is on the right of the area. Heber J Grant Builsing can be seen at the back.

November 6, 2020 Update

October 19, 2020 Update

April 2020, Update

March 27, 2020 Update

Okland Construction completed the demolition of the GCB this week.

March 2020 Update

The Science Building has a new private road and a sidewalk closure along Mikionele Way. The private road is for contractors' access only. For your safety, pedestrians are directed to use the sidewalk on the opposite side, and all regular traffic should proceed along Mikionele Way as normal.

January 2020 Update

Finally, after well over 1 year of waiting for permits, the demolition permit has been issued! A Health Department notification will be completed Thursday, January 30 (2-week process). A four-week abatement process will begin next week, followed by a 4-week demolition process. Then the building pad preparation and construction will take place for an additional 3 weeks (until March 30). Once the pad is completed it must compact for 3 months. Construction will begin this summer and is expected to complete in the first part of 2022.

Current Project at BYUH
Science Building 1